GO
GoAutoLogo
MENU

Make / Model Search

Mazda Mazda3

Mazda BL Mazda3

1 Apr 2009

ARGUABLY the most important new-car release of 2009 was the second-generation Mazda3.

Prices went up slightly, but so did cabin space, refinement, performance, safety, equipment levels, economy and efficiency A return to the original Mazda3 model nomenclature saw the Neo Sport revert to Neo, Maxx come back, Maxx Sport carry on and SP23 turns SP25 to reflect a larger powerplant.

Two body styles were offered from the start, again in four-door sedan and five-door hatch guises.

Mazda claimeds better aerodynamics helped quell noise, vibration and harshness issues, while increased suspension rigidity, better placement of vibration-dampening material and beefed-up body and panel rigidity also made the small car quieter.

Improved interior quality was another Mazda goal, and this manifested itself in the use of soft-grained materials on high-visibility areas such as the top of the dashboard, while the cabin’s join lines were also slimmer.

A revised 2.0-litre twin-cam four-cylinder engine producing 108kW of power at 6500rpm and 182Nm of torque at 4500rpm motivated all petrol Mazda3s bar the sports models.

A six-speed manual usurped the old five-speeder, while four gave way to five-speeds in the automatic.

Using 91 RON unleaded petrol, the manual model’s fuel consumption fell 0.3L/100km to 7.9L/100km, while the auto’s 8.2L/100km result was 0.2L/100km lower than before.

Also on the descent were the Mazda3’s carbon dioxide emissions, at 193g/km instead of 199g/km.

As its name suggests, the SP25’s engine was a 2.5-litre unit. This twin-cam 16-valve S-VT variable-valve powerplant was similar to the Mazda6’s item, and produced 122kW at 6000rpm and 227Nm at 4000rpm.

Mazda called the carryover MacPherson strut and multi-link rear suspension systems “newly evolved”, with widespread modifications and alterations to help achieve an improved handling/ride balance.

A revised electro-hydraulic set-up helped cut fuel consumption and Mazda claimed less effort was required to turning the wheel.

In July 2009 the hot MPS variant was introduced, with an almost identical turbocharged four-cylinder engine and the same basic suspension architecture as the previous model, but with changes to try to cure the torque steer that blighted the old car.

Unlike the previous-generation's subtle 'sleeper' looks, muscular styling comprising a prominent bonnet scoop, large roof-mounted rear spoiler and unique pumped-out front guards clearly distinguished the MPS from the standard models.

The 2.3-litre direct-injection turbocharged four-cylinder engine, paired with a carryover six-speed manual, produced an unchanged 190kW at 5500rpm and 380Nm at 3000rpm, providing 0-100km/h in just 6.1 seconds, with slightly reduced fuel consumption and CO2 emissions.

A The manual-only 2.2-litre common-rail diesel engine arrived in November 2009 delivering fuel consumption of 5.7 litres per 100km, making it the most fuel-efficient model in the Mazda range, even ahead of the 1.5-litre petrol Mazda2 light car.

Outputs of the revised and enlarged diesel engine were 110kW of power at 3500rpm and 360Nm of torque at 1800rpm, netting a 1.7-second reduction in acceleration time from 50km/h to 100km/h, while combined fuel consumption went down from 6.0L/100km to 5.7L/100km and emissions reduced from 160g/km to 150g/km.

The Mazda3's mid-life makeover of September 2011 was highlighted by the addition of a mid-range Mazda3 SP20 SkyActiv, boasting class-leading petrol fuel economy of 6.1 litres per 100km, sprightly 113kW power and Mazda's first attempt at idle-stop technology.

Body design changes included a new front bumper said to improve aerodynamic flow, along with a fresh rear bumper treatment that was 30mm shorter, new 15- and 16-inch alloy wheel designs, and new seat trim and silver highlights in the cabin.

Read more

When it was new

Mazda models

Catch up on all of the latest industry news with this week's edition of GoAutoNews
Click here